| Subject | Text |
| sheets to CB-5035Z | impossible to merge files for Samsung CB-5035 because error bad crc sector to file number 2 "samsung |
| As far as I know the slim ps2 control port is soldered to the board. |
|
|
| [quote:e3543b989f="Anonymous"][quote:e3543b989f="minnie"][quote:e3543b989f="Anonymous"]What is the P |
| you dont need a manual to cure this fault just replace ic7064 on the small signal panel with updated |
| Writing good curriculum vitae is the entry point for an interview. It is through an inspiring CV tha |
| If the display is coming up with 'Errors' or 'No disc', then its probably the laser assembly or opti |
| service manual / schematic | hi everybody ,
I need a service manual for a panasonic-matsushita 6 cd changer , its model is cx-c |
| Alain,
I opened the TV and carefully removed the PSB for inspection. The type is FSP 204-2F01, Re |
| technics sx p50 piano-broken keys | Anyone know where i can buy spare white piano keys on line, to fit my technics sx p50 electric piano |
| hp 5943 problem with ink cartridges | hi guys !
i have met astrange problem.
i have an hp printer model deskjet 5943 which i bought |
| lock code | hi,
i have onida TRU SLIM one channel not showing there is some massage like enter lock code pls... |
| forget it, they are board level repair or mech complete.
need to align with sharp service remote af |
| Marantz PM593 board YG059J001 K7V-0. I need service manual | Hello,
good evening.
I am looking for the service manual of the marantz PM593. It has a boaord |
| Matsui 28WN20 - Picture width | I can't get the picture to fit with any setting (4:3,16:9,letterbox, widescreen, auto, etc). I have |
| Projector TV with convergence out | I spent a along time repairing a 40" projector TV that I was given also. Most good units I beli |
| Re: Sharp Fax Repair | Try flipping the roll - if it is installed backwards a lot of times is will fit in the machine, but |
| Sony KV29F3U service mode entry | I am trying to get into the service mode on a Sony KV29F3U. The instructions to press + (osd button |
|
|
| *Note: I would recommend either a VOM or DMM before you start this, since the rest of the troublesho |
| Spare Parts for Packard Bell 170ASW & SlimView 517 Monit | [quote:7eeeff0ccf="africa"]help!!scheme alim. of Packard Bell .slim view 517, monitor 15"[/quot |
| Remote Control Service code for TV Hisense 29 inch TC2919H | I have to repaire a TV, however the client has lost the remote control.
I would be grateful if |
| http://www.partstore.com/Model/Sanyo/Sanyo/DP32746.aspx
Looks correct to me...
[quote:82ecf9339e |
| What a shame what does a person do with this thing...Its just a shame to throw out. A samsung panel |
| Thank you, [b:d7a8337e2c]plamensl[/b:d7a8337e2c]...
¿Samsung 710s = LG Studioworks 710s? :r |
| Resistor does not ground. Not reading any resistance and have no continuity through it.
I think |
| ANY STRANGE FAULT ON A PHILIPS A10E CHASSIS TV IS USUALLY CURED BY REPLACING THE PAINTER IC, IC7064 |
| Renealt Clio and compatible stereos | Hey, Im lookng to replace he standard stereo in my renault clio 16v 1.2 (2001) and was wondering if |
| probable cause is ic7064 on the small signal pcb, it is a 100pin surface mount device, make sure you |
| Marantz PM-44SE (special-EDT) amp volume/ channel fault | [u:eb545586f7]Marantz PM-44SE (special-EDT) amp volume/channel fault: [/u:eb545586f7]
Started wi |
| I carefully looked at the picture you posted... | I must be blind... I see the CRT board. I don't see any white cabling that is loose. I may can be of |
| Beko 14.2 | The Beko was dead, i had to fit a new LOPTX (due to arcing) and the LOPTR(BU508). TV fired up but wi |